Nokia 200 4G user guide
Ladda enheten
Ditt batteri är delvis laddat från fabriken, men du kan behöva ladda det igen innan du kan använda din enhet.
Ladda batteriet
- Sätt i laddaren i ett vägguttag.
- Anslut laddaren till enheten.
Överladda inte batteriet: När laddningen av din enhet är klar, koppla först ur laddaren från enheten och sedan från eluttaget.
Överanvänd inte batteriet: Undvik att låta batteriets laddning sjunka under 20 % eller att använda det tills det tar slut på ström och stängs av.
Om batteriet är helt urladdat kan det ta några minuter innan laddningsindikatorn visas.
Tips! Du kan använda USB-laddning när det inte finns något vägguttag tillgängligt. Effektiviteten vid USB-laddning varierar kraftigt, och det kan ta lång tid innan laddningen startar och enheten börjar fungera.
Charger model
For EU countries: Use your device only with an original BL-L5H rechargeable battery. Charge your device with the AC-18 charger. Charger plug type may vary. HMD Global may make additional battery or charger models available for this device.
For environmental reasons this package does not include a charger. This device can be powered with most USB power adapters and a cable with USB Type-C plug. Use only chargers and cables that are compliant with applicable country regulations, and international and regional safety standards to avoid any risk of property loss or personal injury. The power delivered by the charger must be between min 2 Watts required by the radio equipment, and max 2.75 Watts in order to achieve the maximum charging speed.
Your device supports the USB-C cable. You can also charge your device from a computer with a USB cable, but it may take a longer time.
For other countries: Charge your device with the AC-18 charger. HMD Global may make additional battery or charger models available for this device. Charging time can vary depending on device capability. Some of the accessories mentioned in this user guide, such as charger, headset, or data cable, may be sold separately.
When charger is not included in the sales box, charge your device using the data cable (included) and a USB power adaptor (may be sold separately). You can charge your device with third-party cables and power adaptors that are compliant with USB 2.0 or later and with applicable country regulations and international and regional safety standards. Other adaptors may not meet applicable safety standards, and charging with such adaptors could pose a risk of property loss or personal injury. It is recommended to use a power adaptor with an input of 100-240V~50/60Hz 0.1A and output of 5V/0.55A to optimise the charging of your device.