HMD 105 Pure user guide
Charge your phone
Your battery has been partially charged at the factory, but you may need to recharge it before you can use your phone.
Your device has a removable, rechargeable lithium-ion battery. For safe removal of the battery, read the safety information.
Charge the battery
- Plug the charger into a wall outlet.
- Connect the charger to the phone. When done, unplug the charger from the phone, then from the wall outlet.
If the battery is completely discharged, it may take several minutes before the charging indicator is displayed.
Tip: You can use USB charging when a wall outlet is not available. The efficiency of USB charging power varies significantly, and it may take a long time for charging to start and the device to start functioning.
Charger model
Use your device only with an original BL-L5G rechargeable battery.
Charging time may vary depending on device capability.
Charge your device with the HAC-18 charger. Charger plug type may vary. HMD Global may make additional battery or charger models available for this device. The power delivered by the charger must be between min 2 Watts required by the radio equipment, and max 2.75 Watts in order to achieve the maximum charging speed.
When charger is not included in the sales box, charge your device using the data cable (included) and a USB power adaptor (may be sold separately). You can charge your device with third-party cables and power adaptors that are compliant with USB 2.0 or later and with applicable country regulations and international and regional safety standards. Other adaptors may not meet applicable safety standards, and charging with such adaptors could pose a risk of property loss or personal injury. It is recommended to use a power adaptor with an input of 100-240V~50/60Hz 0.1A and output of 5V/0.55A to optimise the charging of your device.